HK Low Profile Scope Mount MP5 HK91 G3 HK93 CETME HK94 HK 91 HK 94

Low Profile HK Scope Mount

This is the best Low Profile Scope mount available for HK rifles. I have tried several others and this is the only one I would use on my personal rifle. Super light weight, easy to install and surprisingly durable to use and abuse. $129 each or two for $250! These are not quick detach like the STANAG claw mounts however they install in minutes. Once installed they never need to be removed as they mount low enough to alloy for normal sight use, in fact these are the lowest profile, low profile mounts on the market. You can then use quick detach scopes/optics or just use standard rings/optics.

This sleek design allows the operator to flip this scope mount in either direction without blocking the ejection port. Once installed these mounts will never accidentally un-lock. Not even a hammer will jar this mount from it's zero. Additionally ONE MOUNT FITS ALL of the following Real World G3 / MP5 Heckler & Koch Weapons Systems:

WEAPONS SYSTEMS:

    * HK 21
    * HK 91
    * HK G3 (All Variants)
    * HK 33
    * HK 53
    * HK 93
    * HK 94
    * HK MP5A2 & MP5 A3
    * HK MP5K
    * HK MP5K PDW
    * PTR-91 / JLD (All Variants)
    * CETME
    * Vector 53 (All Variants)
    * Special Weapons SW5 (All Variants)
    * Bobcat Weapons BW-5 (All Variants)
    * As well as all Variants / Clones of MP5 & G3 World Wide; Licensed or Unlicensed i.e. Century, Greek, Iranian, Pakistani South African etc.

SPECIFICATIONS / SPECIAL FEATURES:

    * 100% Made In the USA.
    * 6061 T-6 Aircraft Grade Aluminum
    * Patented Design: Patent Pending.
    * CNC Machined
    * Hard Anodized Flat Black
    * Super Light Weight @ 71.0 gr. ( 2.535 oz. )
    * 5.370 Inches ( 136.4mm ) Long.
    * Super Low Profile Rail Height @ 0.295" ( 7.35mm ).
    * 100% Picatinny / Mil. Spec. 1913 Correct.
    * Near Zero Rise from the top of your receiver.
    * 4 - Independent Draw Style Hooks for 100% Secure Attachment.
    * 0.255 Inches (5.5mm) of Draw Length to accommodate even CETME / Out of Spec. Weapons.
    * Chamfered Edges for Fast / Easy On & Off in Adverse Conditions.
    * Added Stabilizing Point at the Far End. This keeps a solid contact between the top of your receiver and the scope mount.
    * 3 - Counter Recoil Slots to Mate with your Specific Weapon's Scope Mount Anti-Recoil Blocks.
    * Custom Length / Design / One Off / Prototypes Available. (See Below / Click Here)
    * Does NOT Interfere with the iron sights when a scope is not in place. Clear unobstructed view over the rail.

Made Specifically for LIVE WEAPONS. This is NOT an airsoft part made of questionable pot metal in foreign factories by people who have never even seen a real machine gun. This is the real deal made in the USA and it is the most cost effective (without sacrificing quality) HK Scope Mount on the market.

Additionally these are the LOWEST PROFILE possible so that they do NOT interfere with the open / iron sites when a scope is not in place. The profile is so low that there is no reason to remove the mount once it has been attached to the weapon system as it does not interfere with any normal function or cleaning. A customer can have the ability to see through / under the scope (like the HK High Mount) if they just use medium to high profile scope rings with see through apertures. These were specifically designed to accommodate Aim Points and other Red Dot Sites.

Lastly: 100% Picatinny / Mil. Spec. 1913 Correct. Meaning that your expensive SWAN Throw Lever / Quick Release / ARMS Scope Rail Mount will lock 100% the way it was intended. We have seen the influx of hundreds foreign made mounts, rings, risers, rails etc. that claim to be Throw Lever compatible but, are NOT. This one is 100% COMPATIBLE!