You have no items in your shopping cart.

Product reviews for HK BIPOD

Write your own review
  • Only registered users can write reviews
  • Product can be reviewed only after purchasing it
*
*
Bad
Excellent
Existing reviews
HK Bipod fit to CA C93 clone
The HK Bipod just slipped right on to CA C 93 (Century Arms HK 93 Clone) wide forearm and locked nicely in place. Good phosphate appearance. Locking piece on arms a little stiff, but arms pulled easily away from forearm and locked solidly in place in the extended position. When released, the arms locked up tight against forearm. Overall good, solid appearance and quality, good phosphate coating. Well worth the price. Shipping took just a few days.
Logan | 1/31/2014 7:30 PM
Was this review helpful? Yes No (0/0)
Stoked
Excited to have it. Fits well. Easy to install. The locks that allow the bipod to swing down and up might need some WD-40. It fits snug on the hand guard which I purchased from RTG also. I don't understand why someone would pay 300 bucks for one when its 80 bucks for something just as good.
Logan | 3/13/2014 9:16 PM
Was this review helpful? Yes No (0/0)
Fabulous
Looks exactly like the H&K bipod off my HK91. Fit perfect on my clone using POF G3 wide handguard.
Logan | 2/24/2016 2:30 AM
Was this review helpful? Yes No (0/0)
As advertised!
This item comes and goes in stock so if you need one and it's in stock...buy it now! Looks great on my PTR91A3R. The locking buttons do require some lube to get them to move freely. These are made on HK equipment and both look and function as advertised.
Logan | 5/23/2016 6:47 AM
Was this review helpful? Yes No (0/0)
I'm so happy!
Bought a clone made by Promag & it didn't really fit at all... Was excited these HK Contract Bi-pods finally became available again, got mine yesterday & it fits nicely just as it should. I'm so happy!
Logan | 5/25/2016 4:31 AM
Was this review helpful? Yes No (0/0)
Excellent product
Ordered one of these, was shipped very fast. Bipod is very nicely made, no bad welds, tight lock up on the legs, and clipped to my wide handguard smoothly and tightly. Can't beat it for the price!
Logan | 5/25/2016 5:30 AM
Was this review helpful? Yes No (0/0)
Get one!
These are New and perfect in every respect. They lock up tightly open or closed, rotate correctly and fit like a glove.
Logan | 5/25/2016 7:18 AM
Was this review helpful? Yes No (0/0)
Great buy
Solid and a prefect fit on my C93
Logan | 5/25/2016 6:00 PM
Was this review helpful? Yes No (0/0)
HK Bipod
Great Product worth the wait. Thanks RTG for sending me an email that they were back in stock, Great Idea.
Logan | 5/26/2016 1:06 PM
Was this review helpful? Yes No (0/0)
I don't care who made them, 5 stars from me
Great buy! Can't go wrong for this price!!!
Logan | 5/26/2016 1:22 PM
Was this review helpful? Yes No (0/0)
Top notch!
I was pleasantly surprised to get an in stock notification email for this item the other day. I purchased one for my C93 and could not be happier. The bipod is rock solid and fit perfect on my wide handguard. All steel construction, tight lockup, and nice finish. This thing seems it might last forever. Great buy! Thanks!
Logan | 5/28/2016 2:34 PM
Was this review helpful? Yes No (0/0)
HK Bipod
Fit my rifles perfectly!
Logan | 5/30/2016 5:02 AM
Was this review helpful? Yes No (0/0)
Good Product at Great Price
Just purchased one of these after receiving the email that they were back in stock. Definitely worth the wait. Solid steel construction and fit perfectly in my wide handguard. The only other option I found was purchasing one from HK parts for 5x the price! For that amount you can get the handguard and bipod from here and have money to spare!
Logan | 5/31/2016 8:26 AM
Was this review helpful? Yes No (0/0)
Excellent Bipod
Got this for my C93, perfect fit, metal construction and locks open and closed tight. Couldn't be happier with this purchase, definitely a better option than paying $300 for the HK option.
| 6/12/2016 4:11 PM
Was this review helpful? Yes No (0/0)
Nice product
Had been on the email out of stock list for a year or more and got the email saying in stock. Bought one 1st day and let me tell you these are just as good as my real HK 91 bipod. Lock up tight. Only difference is the color of the finish on these compared to a real HK. Don't hesitate like I did to buy one as they will go out of stock and you will be waiting a long time for them again to be in stock.
Logan | 7/5/2016 3:01 AM
Was this review helpful? Yes No (0/0)
Perfect fit
Fits perfectly on the ptr91 gi
Logan | 7/7/2016 7:29 PM
Was this review helpful? Yes No (0/0)
Quality
Best I've seen yet. Far surpasses others such as Promag (ughh), POF, etc... Very smooth! Good job guys. Plus really quick shipping.
Logan | 8/4/2016 8:01 AM
Was this review helpful? Yes No (0/0)
bipod
very solid feel
Logan | 12/11/2016 1:13 AM
Was this review helpful? Yes No (0/0)
Awesome!!
Great fit, finish, all around solid.As always, fastest shipping i have ever seen!!!!
Logan | 12/13/2016 11:19 AM
Was this review helpful? Yes No (0/0)
Perfect
Great fit. Completes the look of my 93 clone
Logan | 2/14/2017 5:12 PM
Was this review helpful? Yes No (0/0)
Quality bipod
fits perfect on my ptr with wide handguard, folds and deploys as originals.
Logan | 2/16/2017 11:18 AM
Was this review helpful? Yes No (0/0)
Niiiiiiiice!
Very nice bipod. Excellent balance  great quality and price point. The fit and finish on these are great.
Logan | 5/4/2017 4:32 PM
Was this review helpful? Yes No (0/0)
Fantastic
Works great and fits my PTR-91 wide handguard perfectly. These are really hard to find and usually cost a lot more when you do. This is the one you want. Buy with confidence that you will get a great part and a good value.
EDWARD | 7/6/2017 5:06 AM
Was this review helpful? Yes No (0/0)
bipod on c93
Fits like a glove. Could not be any better. Thank you
Logan | 8/8/2017 1:57 AM
Was this review helpful? Yes No (0/0)
Benjamins
The bipod fit perfectly and this time I didn't have to spend hours fitting it :-D
Logan | 8/31/2017 1:24 PM
Was this review helpful? Yes No (0/0)
bi-pod on ptr
fit great. works great
Logan | 9/13/2017 7:27 AM
Was this review helpful? Yes No (0/0)
Great Buy
Bought this with the wide fore grip. Fits great and works great. Best price I found online
Logan | 9/19/2017 4:59 AM
Was this review helpful? Yes No (0/0)
Great bipod
I put this bipod on my C308 with a wide hand guard (which I had to modify/dremel). It is exactly what I wanted. <br />
(NOTE FROM RTG: Thanks for the review. Yes the C308 is a Cetme and has a Cetme front sight triple frame which is a tad larger than HK. Some fitting is required before an HK wide handguard will fit onto a CETME or C308)<br />
Logan | 11/14/2017 1:44 AM
Was this review helpful? Yes No (0/0)
Excellent
Fits and functions perfectly. Thanks!
Logan | 1/16/2018 1:34 PM
Was this review helpful? Yes No (0/0)
Great Product
This bipod was a perfect for for my original HK 91. It snapped right into place with no issues. I recommend this for original HK equipment
Logan | 1/29/2018 7:19 AM
Was this review helpful? Yes No (0/0)
Bipod for HK91
Fits perfectly. Slight interference with sling point connector left side of hand guard when folded. I have seen this with other people so I am not sure if an authentic HK bipod would fit any different . My rifle is a pre-ban HK91
Logan | 2/17/2018 11:34 AM
Was this review helpful? Yes No (0/0)
A great addition to you HK
fit my HK33 perfect and HK91 ! a very nice piece that required no fitting or modification . Will buy from RTG again . The pieces and parts are above expectations !
Logan | 11/19/2018 6:03 AM
Was this review helpful? Yes No (0/0)
Works great on the C94
Well made, quality bipod. Better than paying hundreds on other websites. Attached to my C93 rifle easily. Swivels side to side when mounted, but doesn’t rotate rifle left and right. Well worth the money if you want a quality bipod. When folded, it locks up tight, but isn’t flush fit to the handguard.
Logan | 9/21/2019 6:28 PM
Was this review helpful? Yes No (0/0)
Works great
Fits perfectly and locks up tight. Works just as advertised.
Logan | 9/26/2019 5:22 PM
Was this review helpful? Yes No (0/0)
Nice bi-pod
Why over pay elsewhere. Perfect fit for my OEM HK hand guard.
Logan | 9/28/2019 6:14 AM
Was this review helpful? Yes No (0/0)
good product, GREAT customer service
good item, customer service from them is great, will be buying more stuff in the future,,
Thanh | 10/1/2019 2:07 PM
Was this review helpful? Yes No (0/0)
Nice addition to my rifle
I put this on an original H&amp;K 91 that I purchased new in 1981. When it arrived the bipod was sealed in a plastic bag and boxed very well. I notice that one of the e-clips was missing from the leg pivot pin. I got some form Tractor Supply, once installed it works great. This was over the weekend when RTG Parts was closed, I was impatient.
Logan | 10/9/2019 5:15 AM
Was this review helpful? Yes No (0/0)
Love this.
Nice range day add on. Looks sweet.
Logan | 1/9/2020 2:16 AM
Was this review helpful? Yes No (0/0)
Perfect bipod for wide handguards on HK91/HK93 types
Works great with both my HK91 and HK93 clones that have the wide hand guards. Slots in perfectly where it should and folds up into the handguards too nicely when not in use.
Logan | 12/9/2020 10:55 AM
Was this review helpful? Yes No (0/0)
Bipod
New in the box, Perfect fit and function.
Logan | 4/11/2022 1:02 PM
Was this review helpful? Yes No (0/0)
Excellent product, excellent service
RTG shipped the bipod very quickly and securely. Brand new, sealed in plastic. Excellent fit and finish. Mates very well with my HK G3 wide handguard and locks in deployed position. Stoys well
Logan | 7/13/2023 4:58 AM
Was this review helpful? Yes No (0/0)
CONTACT US
SHOP
SUPPORT

Copyright 2014-2025 RTG Parts. | All prices are in USD | Site Designed by Foremost Media