(R)ailed(S)tock(A)daptor(AK)(P)istol
This Railed Stock Adapter was designed to replace the sling loop on the NAK-9 pistol and allow the installation of stocks on an approved SBR.
It can also be installed on most AK pistols by simply drilling and tapping your rear trunnion.
Bolt: M10x1.5
8.5mm drill size for tap
It has a lip on the bottom that prevents it from rotating when installed.
Note that installing a stock on a pistol makes it an SBR, make sure to follow all local, state and federal laws!
Not compatible with Zastava M92/M85 - this requires RSA-YAKP
Not compatible with SAM7K-34.
