WHEELER FAT WRENCH WITH 10 BIT SET

Wheeler's FAT Wrench® brings perfect consistency to every screw on your rifle!  This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws and other screws, which aids in accuracy and decreases the opportunity for problems in the field.  The FAT Wrench® is a perfect compliment to the Deluxe Gunsmithing Screwdriver Sets.  Together, they can ensure accurate tightening of most every screw on any gun in your collection.
 

Plastic Case Included / Bits Included:

• Leupold/Buehler windage bit

• #10 flat blade bit

• #11 flat blade bit

• #32 flat blade bit

• 3/32" Allen bit

• 7/64" Allen bit

• 5/32" Allen bit

• T15 Torx bit

• T20 Torx bit

• Square drive adapter bit

Specifications:

• Length: 6"

• Torque Adjustment Range: 10 inch lbs to 65 inch lbs

• Quantity of Bits Included: 9

• Drive Size: 1/4"

• Accuracy: +/- 2 inch-lbs

Product FAQs:
Why do I need a Torque Wrench?
Adjusting screws on gun actions, scope bases and scope rings can not only prevent damage to your gun but can greatly increase accuracy.

What torque should I adjust my fasteners to?
Always refer to manufacturer's specs but the following is recommended:

Base Screws	30 inch-lbs
Ring Screws (aluminum)	10-15 inch-lbs
Ring Screws (Steel)	15-20 inch-lbs
Windage Screws	30-40 inch-lbs
Guard Screws (with bedding pillars)	65 inch-lbs
Guard Screws (no bedding pillars)	40 inch-lbs

*note: middle guard screw should not be torqued

Will the bits from my Wheeler Engineering Screwdriver Set fit in the FAT Wrench?
Yes. The bits included in the Wheeler 89pc set and 72pc set are designed to work perfectly with the FAT Wrench.

Storage Tip for FAT Wrench:
Never leave the Fat Wrench adjusted to high torque settings for extended periods of time. After each use adjust the torque to the lowest setting prior to storage. This will releive the tension from the internal mechanisms and ensure maximum accuracy over time.